Support
Support
Sales Information
Where to Buy
Become Partners
 
Sales Contact
 sales@edge-core.com
+886-3-563-8888
 

 

FAQs/Knowledge Base
Q7. SMC8724ML3 How to enable the DHCP relay

A:

How to enable the DHCP relay with external DHCP server

Command as below: (Skip --> VLAN creation, IP address assignment)

VLAN 1: 192.168.10.x/24
VLAN 2: 192.168.20.x/24
VLAN 3: 192.168.30.x/24

DHCP Server (3 DHCP Scope) IP: 192.168.10.1 @ VLAN 1

Console(config-if)#int vlan 2
Console(config-if)#ip dhcp relay server 192.168.10.1
Console(config-if)#int vlan 3
Console(config-if)#ip dhcp relay server 192.168.10.1
Console(config-if)#exit
Console(config)#exit
Console#ip dhcp restart relay

Always remember to issue --> ip dhcp restart relay