Support
Support
Sales Information
Where to Buy
Become Partners
 
Sales Contact
 sales@edge-core.com
+886-3-563-8888
 

 

FAQs/Knowledge Base
Q1. SMC8824/48M Jumbo Frame

A:

In order to use the Jumbo frame in SMC88xxM, the firmware must be at least v2.2.0.11.

You can download the lastest firmware from here.

Please follow the below sequence to enable the jumbo frame.

1. Configure the MTU in the global mode

2. Enable the Jumbo Frame in the global mode

3. Configure the MTU and enable the Jumbo Frame in the interface mode.

The below steps is the example to enable the Jumbo Frame on Interface Port 1:

= Finish =