Support
Support
EOL Notice



Sales Information
Where to Buy
Become Partners
 
Sales Contact
sales@edge-core.com
+886-3-563-8888
 
FAQs/Knowledge Base
Q1. How to configure bridge / repeater for wireless router and access point

A:

1) Connect SMC wireless access point to SMC wireless router via LAN connection (RJ45 cable).
a) SMC wireless router IP address : 192.168.2.1 ~(Default IP)
b) SMC wireless access point IP : 192.168.2.25 ~(Default IP)
c) WIRELESS ACCESS POINT IP ADDRESS SHOULD NOT FALL UNDER SMC ROUTER DHCP POOL, UNLESS THE WIRELESS ACCESS POINT IS CONFIGURED AS DHCP CLIENT.

2) Access to the SMC wireless router admin page – http://192.168.2.1/.

3) Amend the wireless setting to your preference setting. Example as below.
a) Wireless SSID (name) : SMCWBR14T-G
b) Wireless Channel : 11
c) Wireless Encryption : WEP 64bit
d) Wireless Password : 1234567890

4) Save setting / apply changes.

5) Access to the wireless router admin page – http://192.168.2.25/.

6) Follow the wireless router setting, copy into the access point. Example as below.
a) Wireless SSID (name) : SMCWBR14T-G (not necessary to follow)
b) Wireless Channel : 11
c) Wireless Encryption : WEP 64bit
d) Wireless Password : 1234567890

7) Enable Wireless Distribution System (WDS).
a) Click on Home network setting --> Wireless --> WDS
b) Click on SCAN button --> Choose the wireless name which is belonging to your wireless router
c) Check on ENABLE WDS box
d) Save setting / apply changes

8) Click on the LOGOUT button which is located at top right hand corner.

9) Access to the SMC wireless router admin page – http://192.168.2.1/.

10) Enable Wireless Distribution System (WDS).
a) Click on Home network setting --> Wireless --> WDS
b) Click on SCAN button --> Choose the wireless name which is belonging to your wireless access point
c) Check on ENABLE WDS box
d) Save setting / apply changes

11) Click on the LOGOUT button which is located at top right hand corner.

12) Unplug the RJ45 cable in between wireless router and wireless access point.

13) Your wireless router and bridge / repeater is able to work now.