|
|
| |
|
|
| |
 |
|
 |
PRODUCTS USED
100Mbps VDSL2 Equipment
|
|
|
|
|
|
| |
| |
 |
SMC7816M/VSW
TigerAccess™ Extended Ethernet Switch
|
| |
The SMC7816M/VSW VDSL2 Switch has a built-inVDSL2 splitter which combines the data and phone signals coming from your Internet and telephone service providers. It passes these signals directly over the standard telephone wiring to multiple users in the same building. The switch supports up to 16 VDSL2 lines. A CPE device is required in each room to separate these signals and pass them on to a customer’s computer and telephone equipment.
|
| |
|
| |
| |
 |
SMC7800A/VCP
TigerAccess™ Extended Ethernet CPE
|
| |
The SMC7800A/VCP VDSL2 CPE operates at the other end of the VDSL line and is used to separate the voice and data signals from the combined VDSL signal at the customers premise in their room or office. It connects to any PC or laptop equipped with a 10/100BASE-TX network interface card. Your existing telephone, modem, or fax machine simply plugs directly into the CPE phone port. There is no need for special additional equipment such as terminators or filters. In fact, there is no need to modify your wiring at all. Since the VDSL connection is based on Ethernet, no further complex software configurations are required.
|
| |
|
|
15Mbps VDSL Equipment
|
| |
|
| |
| |
 |
SMC7724M/VSW
TigerAccess™ Extended Ethernet Switch
|
| |
The SMC 77244M/VSW switch connects local and remote data devices to the internal VDSL network. Devices can be connected over 10/100 Fast Ethernet or 1000Mbps Gigabit Ethernet connections using a modular interface card. Connection to the VDSL Splitter is provided for 24 VDSL ports using a standard RJ-21 telecommunications cable. The switch supports IEEE 802.1Q VLANs and IEEE 802.1p priority queuing for up to 24 VDSL data streams at speed up to 15Mbps at a distance of 1.5 kilometers.
|
| |
|
| |
| |
 |
SMC7024/VSP
TigerAccess™ Extended Ethernet Splitter
|
| |
The SMC SMC7024/VSP VDSL splitter combines voice and data streams over existing telephone wiring systems. The SMC7024/VSP VDSL splitter uses three standard RJ-21 Telco connectors to combine the traffic. One connector is for up to 24 VDSL channels from the VDSL Switch; one for up to 24 telephone connections from the PBX; the third RJ-21 connector plugs into the telephone distribution patch panel to deliver the combined voice/data services to the building tenants or guests.
|
| |
|
| |
| |
 |
SMC7500A/VCP
TigerAccess™ Extended Ethernet CPE
|
| |
The SMC 7500A/VCP VDSL modem is used to split out the voice and data signals from the combined VDSL signal at the customers premise in their room or office. It has one RJ-11 telephone port for the incoming VDSL signal; one RJ-11 telephone port to connect the telephone equipment and 1 RJ-45 10/100 Fast Ethernet port to connect the computer equipment.
|
| |
|
|
|
|
|
|
|
|
|
